NAS100+ - 100W VHF NAS Transmitter

NAS100+
  • NAS100+
  • NAS100+Front Side Top
  • Front
  • NAS100+Back

NAS100+ (100W VHF NAS Transmitter) Details

The NAS100+ is a solid state 100W VHF transmitter intended for the Narrowband Area Service bands.

The NAS100+ is fully compliant with AS4295 and has been type approved by ACMA.

Up to 100W of RF is available to overcome any multicoupler or transmission line losses, allowing NAS licence holders to reliably transmit at their maximum permitted power.

The heart of the NAS100+ is a microprocessor controlled, low phase noise, phase locked loop. This gives excellent audio performance whilst allowing total carrier frequency flexibility.

The signal from the PLL is amplified up to in excess of 100W by a broadband MOSFET stage. One advantage of this technique is a high level of tolerance to reflected power.

The audio input processors incorporate a Bessel antialias filter as well as a peak limiter. The user may also select the type of pre-emphasis applied to the audio.

Extensive telemetry functions allow all parameters to be read or programmed remotely, as well as allowing the front panel to be locked for non-secure locations.

Over line voltage, over SWR and over temperature protection are all standard.

Each NAS100+ comes complete with extensive documentation covering installation, use, maintenance and trouble shooting.

The NAS100+ is designed and manufactured in Australia and comes with a 3 year warranty.